Allows installation of large equipment in a wall cabinet
IP20, capacity 50 kg

1st section
The first section allows the installation of 19“ equipment with a maximum height of 6U and depth of 450 mm. The device is positioned vertically and 19“ rails are infinitely adjustable over the entire depth of the cabinet. On the back wall is cable entry as well as at the top and bottom of cabinet. Cable connection between sections allows the opening at the central divider. All cable entries have break-out covers.

2nd section
The second section offers mounting width 19“, height 12U and depth 450 mm. Mounting rails are infinitely adjustable within the entire depth. This section is usually used for structured cabling and active elements of the network. Here are individual services connected to the workstations. The recommended capacity is up to 48 workstations (2 ports per workstation according to standards).

3rd section
The third section occupies the entire bottom area of the wall cabinet. There is space for equipment with a maximum depth of 800 mm, width 19“ and height depending on the model of the cabinet from 2 to 7 Units. Access to this section is through a door on the right side of the cabinet. Sufficient space must be kept next to the cabinet for equipment installation and maintenance.

Flexible door opening
The hinge system allows the door to open almost 180°.
Adjustable vertical rails
One pair of vertical 19“ rails is freely-adjustable within the cabinet depth. This simplifies the mounting of the device and the organisation of connecting cables.

Rigid construction
High quality workmanship and the most up-to-date technology ensure a perfect look of the cabinet.

Bottom section for servers
19“ section in the lower part of the cabinet is designed for the installation of servers and other devices on sliding rails. It can have a capacity from 2 to 7 Units. Each section of cabinet is closed with a lock, on request with a unique key.

Server installation
Rack-mount servers or similar devices with a depth of up to 800 mm are mounted into cabinet using special telescopic rails, which are specific to each device and are not part of the cabinet.

Cooling of installed equipment
Cooling by air flow through perforation of the frame and side door can be supported by installation of fans for wall-mounted cabinets (RAX-CH-X07-X9).
The original version with vertically stored server 2U is still available on request.