Product description:
S/FTP cat.7 ALANTEC cable is the highest performance (10 Gb) shielded multimedia data communications cable, designed for use in environments exposed to electromagnetic interference and/or requiring high frequencies of operation.
High quality of the product has been verified by testing at the INTERTEK laboratory in New York (USA) and confirmed by the appropriate certificate.
Cables are designed for indoor horizontal and vertical installations in data communications and CCTV networks. Additionally, special product solutions in ALANTEC structured cabling system offer allow using above mentioned cable for DVB-C and satellite TV transmission using headend, DVB-S.
All ALANTEC cables are compliant with CPR directive on classification of construction products on reaction to fire and defining test methods for cables to be installed in buildings.
Product covered by 25 years system warranty.
Technical Specifications:
CONSTRUCTION AND ELECTRICAL PARAMETERS
Category 7
Class F (1000MHz)
Cross section AWG 4x2x23AWG
Conductors single stranded copper, diameter 0,57mm (23AWG)
Insulation polyethylene
CPR fire classification (Euroclass) B2ca
Stranding element 4 twisted pairs, each pair wrapped with polyester foil, all shielded with braided Cu wires, 40% coverage
Screen pairs shielded with polyester foil covered with aluminum layer, under the screen - grounding wire made of tin-plated copper wire, diameter min. 0,4 mm, center additionally shielded with Cu wire braid
Coating halogen-free material, non flame propagating (LSOH/FRNC) and corrosive gas resistant
PoE 802.3 at
Coupling loss 80 dB
Color light gray
ELECTRICAL PROPERTIES AT 20ºC
DC resistance ≤ 95 Ω /km
Variable resistance ≤ 2%
Insulation resistance (500V) ≥ 5000 MΩ *km
Capacitive reactive resistance at 800 Hz nom. 48 nF/km
Variable reactive capacitive resistance ≤ 1500 pF/km
Characteristic apparent resistance (1-1000MHz) (100 ± 15) Ω
Nominal propagation speed (NVP) 74%
Delayed propagation Nominally ≤ 535 ns/100m
Delay angle Nominally ≤ 20 ns/100m
DC system tester, 1 min. (core) 1000 V
MECHANICAL PROPERTIES
Bending radius 4 x outer diameter
Max. drawing force 120 N
Temperature range during use -30°C to + 75°C
Temperature range during installation 0°C to + 50°C
Outer diameter 7,4 mm (+/-0,5mm)
Weight kg/km 59
Packing spool (500m)